PnP DHCP Option 43 with Fiber Ports

Testing for PnP with APIC-EM works great through a Ethernet uplink, but when using an SFP Multimode Fiber Uplink not seeing anything link up.  Is this a feature not quite set up yet with the PnP Agent.

 Here is the DHCP Option 43 configuration on the router it's uplinking to.

 ip dhcp pool APICPnP

network 10.2.222.0 255.255.255.248

default-router 10.2.222.1

option 43 ascii "5A1N;B2;K4;I10.100.4.38;J80"

 The switch has been factory defaulted:

==============Website screen output========================

configure terminal

crypto key zeroize

  no crypto pki certificate pool

no pnp profile pnp-zero-touch

end

delete nvram:*.cer

delete stby-nvram:*.cer (if the device has stack members)

write erase

reload

====================End of output======================

•  having problem as well with pnp on 3750x with 15.2.(4)E2, pnp doesnt start working..

A "show interface" of the interface in question should do.

started to work after a couple of switch reloads. Also i put the pnp profile manually. but later on i tried DHCP way and it worked.