Trying to PnP provision a new 3802i AP (which is upgraded from 8.2 to 8.3 release in order to get PnP to function) with PI3.1.6 integrated with APIC-EM 1.4.2 with a new config. For some reason it's not properly getting through and stopping the process with an error. Cannot find any reference to the error. The json file which was generated looks perfectly fine.
|2017-05-08 16:22:25 (W. Europe Standard Time)||Received response from pnp agent for message correlatorId: Cisco-PnP-1.0-6-f21818bf-c94d-4g9d-9db7-73fe5453aef4-1 but with error code : ZTD_CMD_ERROR Response String: XSVC_ERROR:XSVC_ERROR_CONFIG_UPGRADE_INTERNAL:PnP - Config Apply failed. Invalid value in json or missing Primary WLC IP service log: null|
|2017-05-08 16:22:21 (W. Europe Standard Time)||Hostname configured successfully|
|2017-05-08 16:22:20 (W. Europe Standard Time)||Matched a pre-provisioned rule in site Test|
|2017-05-08 16:22:14 (W. Europe Standard Time)||AP IP address successfully retrieved: 10.1.20.102|
|2017-05-08 16:18:59 (W. Europe Standard Time)||Device first contact|
was expecting to be able to set a FlexConnect Group as mentioned here Cisco Prime Infrastructure 3.1 User Guide - Configuring Plug and Play [Cisco Prime Infrastructure] - Cisco under Plug and Play profiles. But it seems not be be in the Prime GUI..
This is how it has been injected from Prime Infra, but also tried from APIC-EM directly - same result.
- You falling victim to Microsoft smart quotes.
the above looks fine, but have seen the smart quotes issue many times in the past.
Change curly quotes to straight quotes and vice versa - Office Support
Please sign in to leave a comment.