Yang module for show bgp ipv4 unicast community

• Want to know which yang module is used to find this corresponding cli 

RP/0/RP0/CPU0:dedsdf1002jl1#sh bgp ipv4 unicast community 62300:19

Fri May 26 14:33:08.165 EDT

BGP router identifier 10.80.68.69, local AS number 62300

BGP generic scan interval 60 secs

Non-stop routing is enabled

BGP table state: Active

Table ID: 0xe0000000 RD version: 340402

BGP main routing table version 340402

BGP NSR Initial initsync version 3666 (Reached)

BGP NSR/ISSU Sync-Group versions 0/0

BGP scan interval 60 secs

 Status codes: s suppressed, d damped, h history, * valid, > best

  i - internal, r RIB-failure, S stale, N Nexthop-discard

Origin codes: i - IGP, e - EGP, ? - incomplete

  Network Next Hop Metric LocPrf Weight Path

*>i10.80.68.66/32 10.80.68.66 0 100 0 ?

* i 10.80.68.68 0 100 0 ?

--(Entry Removed)---

Unable to get the same out put when we are using Cisco-ios-xr-ipv4-bgp-oper model

Please let us know RPC for this cli

 sh bgp ipv4 unicast community 62300:19

This may not be the right forum for BGP-specific questions. You can search through the documentation for the YDK cisco-ios-xr bundle where you may find the data model you are looking for: http://ydk.cisco.com/py/docs/gen_doc_408eed019715fbec66d36658ec93bcefe15e2706.html.

 IOS XR doesn't model show commands in YANG.  So, you won't have an RPC or an operational data model that matches a specific show command.  Instead, you have a BGP operational model that can be seen as the raw data used to implement all BGP show commands.  The YDK api for that model is at:

http://ydk.cisco.com/py/docs/gen_doc_408eed019715fbec66d36658ec93bcefe15e2706.html

You can find sample YDK scripts that use the oper models to implement some show commands at:

ydk-py-samples/samples/basic/crud/models/cisco-ios-xr/Cisco-IOS-XR-clns-isis-oper at master · CiscoDevNet/ydk-py-samples…

These samples will shed some light on how data on an oper model can be leveraged to obtain equivalent output to an existing show command.