Sample config needed for UCS platform emulator

Our department is looking seriously at the Cisco UCS platform for our compute resource in our datacenters moving forward.  As part of the research into the UCS platform, I need to get my hands on a sample configuration that I could load into my UCS Platform Emulator.  Sure, I can build my own config in the emulator, but without having a UCS environment of my own yet, I would like to see how others have done it, so that (specifically from a networking perspective), I can analyze a "real" configuration in the emulator so that I can easily comprehend how everything (physical, virtual) is tied together.  Ideally, I would like to look at a config that was built for a VMware environment.

Are there any sample configs posted on Cisco's site?  I was not able to find one.

Thanks,

Tim Kidd

Tim,

I have written a PowerShell script that builds a UCS configuration from the ground up.  I have included a sample configuration for a UCS as part of the tool.  I have used my tool on the emulator and real system many time with success.  If this is of interest to you, you can find it at:

UCS Base Configuration Builder PowerShell Script

Let me know if you have any problem or questions.

Joe

This was exactly what I was looking for, Thanks!