Please, check out the Cisco CMX Design and Implementation Guide, Cisco Connected Mobile Experiences (CMX) CVD - Cisco
currentServerTime = Time of the CMX server in the local timezone that is configured on the server when this packet was written
firstLocatedTime = When device first was added to the ACTIVE MAC table
For this MAC address and this session of this MAC address, when was this device first located. First means a device was created for the first time ever (i.e. We have a memory structure, when was this MAC first added, or a device that could have been seen previously, but is not in active table now (for example due to timeout). So device here for 1 hour, then gone for 1 hour then back. You would have a firstLocatedTime different in the two records.
lastLocatedTime = Last time we have a location update for this device
Dot11Status = indicates connected to the network as Associated and the APMacAddress is the AP which it is connected; Probing to find a valid AP to connect and the APMacAddress is the AP which has strongest reception; and Unknown for inactive client devices and clients with unknown IP addresses. Note, that CMX aggregates information from the wireless network, and therefore refer to the values defined in the AP or WLC. These references can be found here Wireless Products, Wi-Fi Networking, and Mobility Solutions - Cisco
Please sign in to leave a comment.